html5-qrcode vs qr-scanner vs qrious
웹 개발용 QR 코드 라이브러리
html5-qrcodeqr-scannerqrious유사 패키지:

웹 개발용 QR 코드 라이브러리

웹 개발에서 QR 코드를 생성하고 스캔하는 기능은 사용자 경험을 향상시키고 다양한 응용 프로그램에서 유용하게 사용됩니다. 이 라이브러리들은 QR 코드의 생성 및 스캔을 쉽게 할 수 있도록 도와주며, 각기 다른 기능과 사용 사례를 가지고 있습니다.

npm 다운로드 트렌드

3 년

GitHub Stars 순위

통계 세부사항

패키지
다운로드
Stars
크기
Issues
발행일
라이선스
html5-qrcode2,221,1186,2542.63 MB4534年前Apache-2.0
qr-scanner736,2532,904524 kB119-MIT
qrious93,7461,616-449年前GPL-3.0

기능 비교: html5-qrcode vs qr-scanner vs qrious

QR 코드 스캔 기능

  • html5-qrcode:

    HTML5 QR Code는 웹캠을 통해 QR 코드를 스캔할 수 있는 기능을 제공합니다. 이 라이브러리는 사용자가 웹 브라우저에서 직접 QR 코드를 스캔할 수 있도록 하여, 별도의 설치 없이 즉시 사용할 수 있는 장점이 있습니다.

  • qr-scanner:

    QR Scanner는 빠른 스캔 속도를 자랑하며, 모바일 기기에서 최적화된 성능을 제공합니다. 이 라이브러리는 실시간으로 QR 코드를 인식하고, 스캔된 데이터를 즉시 처리할 수 있습니다.

  • qrious:

    Qrious는 QR 코드를 생성하는 데 특화되어 있으며, 다양한 스타일과 색상을 지원합니다. 사용자는 QR 코드의 디자인을 쉽게 커스터마이즈할 수 있습니다.

사용 편의성

  • html5-qrcode:

    HTML5 QR Code는 간단한 API를 제공하여, 개발자가 쉽게 QR 코드 스캔 기능을 웹 애플리케이션에 통합할 수 있도록 돕습니다. 문서화가 잘 되어 있어 빠르게 시작할 수 있습니다.

  • qr-scanner:

    QR Scanner는 사용하기 쉬운 인터페이스를 제공하며, 복잡한 설정 없이도 즉시 사용할 수 있습니다. 모바일 환경에서의 사용이 용이합니다.

  • qrious:

    Qrious는 QR 코드 생성에 필요한 간단한 메서드를 제공하여, 개발자가 쉽게 QR 코드를 생성하고 커스터마이즈할 수 있도록 합니다.

성능

  • html5-qrcode:

    HTML5 QR Code는 다양한 해상도의 웹캠에서 잘 작동하며, 스캔 속도가 빠릅니다. 그러나 조명이 부족한 환경에서는 성능이 저하될 수 있습니다.

  • qr-scanner:

    QR Scanner는 모바일 기기에서 최적화되어 있어, 빠른 스캔 속도를 자랑합니다. 실시간으로 QR 코드를 인식하고 처리하는 데 강점을 가지고 있습니다.

  • qrious:

    Qrious는 QR 코드 생성 시 성능이 우수하며, 복잡한 디자인을 처리하는 데도 효율적입니다.

커스터마이징 옵션

  • html5-qrcode:

    HTML5 QR Code는 기본적인 스캔 기능을 제공하지만, 커스터마이징 옵션은 제한적입니다. 주로 스캔 기능에 중점을 두고 있습니다.

  • qr-scanner:

    QR Scanner는 기본적인 스캔 기능에 중점을 두고 있으며, 커스터마이징 옵션은 상대적으로 적습니다.

  • qrious:

    Qrious는 QR 코드의 색상, 크기 및 로고 삽입 등 다양한 커스터마이징 옵션을 제공하여, 사용자가 원하는 스타일로 QR 코드를 생성할 수 있습니다.

지원 플랫폼

  • html5-qrcode:

    HTML5 QR Code는 모든 최신 웹 브라우저에서 작동하며, 데스크톱 및 모바일 환경 모두에서 사용 가능합니다.

  • qr-scanner:

    QR Scanner는 모바일 기기에서 최적화되어 있으며, 주로 모바일 웹 애플리케이션에서 사용됩니다.

  • qrious:

    Qrious는 웹 기반 QR 코드 생성 라이브러리로, 모든 웹 브라우저에서 사용할 수 있습니다.

선택 방법: html5-qrcode vs qr-scanner vs qrious

  • html5-qrcode:

    HTML5 QR Code는 브라우저에서 직접 QR 코드를 스캔할 수 있는 기능을 제공하므로, 사용자가 별도의 애플리케이션을 설치하지 않고도 QR 코드를 스캔할 수 있는 웹 기반 솔루션이 필요할 때 선택하는 것이 좋습니다.

  • qr-scanner:

    QR Scanner는 빠르고 간편한 QR 코드 스캔 기능을 제공하며, 모바일 환경에서 최적화되어 있습니다. 모바일 웹 애플리케이션에서 QR 코드 스캔 기능을 구현하고자 할 때 적합합니다.

  • qrious:

    Qrious는 QR 코드 생성에 중점을 두고 있으며, 다양한 커스터마이징 옵션을 제공합니다. QR 코드의 디자인을 조정하고자 할 때 유용합니다.

html5-qrcode의 README

Html5-QRCode

Lightweight & cross platform QR Code and Bar code scanning library for the web

Use this lightweight library to easily / quickly integrate QR code, bar code, and other common code scanning capabilities to your web application.

Key highlights

Supports two kinds of APIs

  • Html5QrcodeScanner — End-to-end scanner with UI, integrate with less than ten lines of code.

  • Html5Qrcode — Powerful set of APIs you can use to build your UI without worrying about camera setup, handling permissions, reading codes, etc.

Support for scanning local files on the device is a new addition and helpful for the web browser which does not support inline web-camera access in smartphones. Note: This doesn't upload files to any server — everything is done locally.

CircleCI GitHub issues GitHub tag (latest by date) GitHub Codacy Badge Gitter

GitHub all releases npm

Demo at scanapp.orgDemo at qrcode.minhazav.dev - Scanning different types of codes

We need your help!

image Help incentivise feature development, bug fixing by supporting the sponsorhip goals of this project. See list of sponsered feature requests here.

ko-fi

Documentation

The documentation for this project has been moved to scanapp.org/html5-qrcode-docs.

Supported platforms

We are working continuously on adding support for more and more platforms. If you find a platform or a browser where the library is not working, please feel free to file an issue. Check the demo link to test it out.

Legends

  • Means full support — inline webcam and file based
  • Means partial support — only file based, webcam in progress

PC / Mac

Firefox
Firefox
Chrome
Chrome
Safari
Safari
Opera
Opera
Edge
Edge

Android

Chrome
Chrome
Firefox
Firefox
Edge
Edge
Opera
Opera
Opera-Mini
Opera Mini
UC
UC

IOS

Safari
Safari
Chrome
Chrome
Firefox
Firefox
Edge
Edge
**

* Supported for IOS versions >= 15.1

Before version 15.1, Webkit for IOS is used by Chrome, Firefox, and other browsers in IOS and they do not have webcam permissions yet. There is an ongoing issue on fixing the support for iOS - issue/14

Framework support

The library can be easily used with several other frameworks, I have been adding examples for a few of them and would continue to add more.

Html5VueJsElectronJsReactLit

Supported Code formats

Code scanning is dependent on Zxing-js library. We will be working on top of it to add support for more types of code scanning. If you feel a certain type of code would be helpful to have, please file a feature request.

CodeExample
QR Code
AZTEC
CODE_39
CODE_93
CODE_128
ITF
EAN_13
EAN_8
PDF_417
UPC_A
UPC_E
DATA_MATRIX
MAXICODE*
RSS_14*
RSS_EXPANDED*

*Formats are not supported by our experimental integration with native BarcodeDetector API integration (Read more).

Description - View Demo

See an end to end scanner experience at scanapp.org.

This is a cross-platform JavaScript library to integrate QR code, bar codes & a few other types of code scanning capabilities to your applications running on HTML5 compatible browser.

Supports:

  • Querying camera on the device (with user permissions)
  • Rendering live camera feed, with easy to use user interface for scanning
  • Supports scanning a different kind of QR codes, bar codes and other formats
  • Supports selecting image files from the device for scanning codes

How to use

Find detailed guidelines on how to use this library on scanapp.org/html5-qrcode-docs.

Demo


Scan this image or visit blog.minhazav.dev/research/html5-qrcode.html

For more information

Check these articles on how to use this library:

Screenshots

screenshot
Figure: Screenshot from Google Chrome running on MacBook Pro

Documentation

Find the full API documentation at scanapp.org/html5-qrcode-docs/docs/apis.

Extra optional configuration in start() method

Configuration object that can be used to configure both the scanning behavior and the user interface (UI). Most of the fields have default properties that will be used unless a different value is provided. If you do not want to override anything, you can just pass in an empty object {}.

fps — Integer, Example = 10

A.K.A frame per second, the default value for this is 2, but it can be increased to get faster scanning. Increasing too high value could affect performance. Value >1000 will simply fail.

qrbox — QrDimensions or QrDimensionFunction (Optional), Example = { width: 250, height: 250 }

Use this property to limit the region of the viewfinder you want to use for scanning. The rest of the viewfinder would be shaded. For example, by passing config { qrbox : { width: 250, height: 250 } }, the screen will look like:

This can be used to set a rectangular scanning area with config like:

let config = { qrbox : { width: 400, height: 150 } }

This config also accepts a function of type

/**
  * A function that takes in the width and height of the video stream 
* and returns QrDimensions.
* 
* Viewfinder refers to the video showing camera stream.
*/
type QrDimensionFunction =
    (viewfinderWidth: number, viewfinderHeight: number) => QrDimensions;

This allows you to set dynamic QR box dimensions based on the video dimensions. See this blog article for example: Setting dynamic QR box size in Html5-qrcode - ScanApp blog

This might be desirable for bar code scanning.

If this value is not set, no shaded QR box will be rendered and the scanner will scan the entire area of video stream.

aspectRatio — Float, Example 1.777778 for 16:9 aspect ratio

Use this property to render the video feed in a certain aspect ratio. Passing a nonstandard aspect ratio like 100000:1 could lead to the video feed not even showing up. Ideal values can be:

ValueAspect RatioUse Case
1.3333344:3Standard camera aspect ratio
1.77777816:9Full screen, cinematic
1.01:1Square view

If you do not pass any value, the whole viewfinder would be used for scanning. Note: this value has to be smaller than the width and height of the QR code HTML element.

disableFlip — Boolean (Optional), default = false

By default, the scanner can scan for horizontally flipped QR Codes. This also enables scanning QR code using the front camera on mobile devices which are sometimes mirrored. This is false by default and I recommend changing this only if:

  • You are sure that the camera feed cannot be mirrored (Horizontally flipped)
  • You are facing performance issues with this enabled.

Here's an example of a normal and mirrored QR Code

Normal QR CodeMirrored QR Code

rememberLastUsedCamera — Boolean (Optional), default = true

If true the last camera used by the user and weather or not permission was granted would be remembered in the local storage. If the user has previously granted permissions — the request permission option in the UI will be skipped and the last selected camera would be launched automatically for scanning.

If true the library shall remember if the camera permissions were previously granted and what camera was last used. If the permissions is already granted for "camera", QR code scanning will automatically * start for previously used camera.

supportedScanTypes - Array<Html5QrcodeScanType> | []

This is only supported for Html5QrcodeScanner.

Default = [Html5QrcodeScanType.SCAN_TYPE_CAMERA, Html5QrcodeScanType.SCAN_TYPE_FILE]

This field can be used to:

  • Limit support to either of Camera or File based scan.
  • Change default scan type.

How to use:

function onScanSuccess(decodedText, decodedResult) {
  // handle the scanned code as you like, for example:
  console.log(`Code matched = ${decodedText}`, decodedResult);
}

let config = {
  fps: 10,
  qrbox: {width: 100, height: 100},
  rememberLastUsedCamera: true,
  // Only support camera scan type.
  supportedScanTypes: [Html5QrcodeScanType.SCAN_TYPE_CAMERA]
};

let html5QrcodeScanner = new Html5QrcodeScanner(
  "reader", config, /* verbose= */ false);
html5QrcodeScanner.render(onScanSuccess);

For file based scan only choose:

supportedScanTypes: [Html5QrcodeScanType.SCAN_TYPE_FILE]

For supporting both as it is today, you can ignore this field or set as:

supportedScanTypes: [
  Html5QrcodeScanType.SCAN_TYPE_CAMERA,
  Html5QrcodeScanType.SCAN_TYPE_FILE]

To set the file based scan as defult change the order:

supportedScanTypes: [
  Html5QrcodeScanType.SCAN_TYPE_FILE,
  Html5QrcodeScanType.SCAN_TYPE_CAMERA]

showTorchButtonIfSupported - boolean | undefined

This is only supported for Html5QrcodeScanner.

If true the rendered UI will have button to turn flash on or off based on device + browser support. The value is false by default.

Scanning only specific formats

By default, both camera stream and image files are scanned against all the supported code formats. Both Html5QrcodeScanner and Html5Qrcode classes can be configured to only support a subset of supported formats. Supported formats are defined in enum Html5QrcodeSupportedFormats.

enum Html5QrcodeSupportedFormats {
  QR_CODE = 0,
  AZTEC,
  CODABAR,
  CODE_39,
  CODE_93,
  CODE_128,
  DATA_MATRIX,
  MAXICODE,
  ITF,
  EAN_13,
  EAN_8,
  PDF_417,
  RSS_14,
  RSS_EXPANDED,
  UPC_A,
  UPC_E,
  UPC_EAN_EXTENSION,
}

I recommend using this only if you need to explicitly omit support for certain formats or want to reduce the number of scans done per second for performance reasons.

Scanning only QR code with Html5Qrcode

const html5QrCode = new Html5Qrcode(
  "reader", { formatsToSupport: [ Html5QrcodeSupportedFormats.QR_CODE ] });
const qrCodeSuccessCallback = (decodedText, decodedResult) => {
    /* handle success */
};
const config = { fps: 10, qrbox: { width: 250, height: 250 } };

// If you want to prefer front camera
html5QrCode.start({ facingMode: "user" }, config, qrCodeSuccessCallback);

Scanning only QR code and UPC codes with Html5QrcodeScanner

function onScanSuccess(decodedText, decodedResult) {
  // Handle the scanned code as you like, for example:
  console.log(`Code matched = ${decodedText}`, decodedResult);
}

const formatsToSupport = [
  Html5QrcodeSupportedFormats.QR_CODE,
  Html5QrcodeSupportedFormats.UPC_A,
  Html5QrcodeSupportedFormats.UPC_E,
  Html5QrcodeSupportedFormats.UPC_EAN_EXTENSION,
];
const html5QrcodeScanner = new Html5QrcodeScanner(
  "reader",
  {
    fps: 10,
    qrbox: { width: 250, height: 250 },
    formatsToSupport: formatsToSupport
  },
  /* verbose= */ false);
html5QrcodeScanner.render(onScanSuccess);

Experimental features

The library now supports some experimental features which are supported in the library but not recommended for production usage either due to limited testing done or limited compatibility for underlying APIs used. Read more about it here. Some experimental features include:

How to modify and build

  1. Code changes should only be made to /src only.

  2. Run npm install to install all dependencies.

  3. Run npm run-script build to build JavaScript output. The output JavaScript distribution is built to /dist/html5-qrcode.min.js. If you are developing on Windows OS, run npm run-script build-windows.

  4. Testing

    • Run npm test
    • Run the tests before sending a pull request, all tests should run.
    • Please add tests for new behaviors sent in PR.
  5. Send a pull request

    • Include code changes only to ./src. Do not change ./dist manually.
    • In the pull request add a comment like
    @all-contributors please add @mebjas for this new feature or tests
    
    • For calling out your contributions, the bot will update the contributions file.
    • Code will be built & published by the author in batches.

How to contribute

You can contribute to the project in several ways:

  • File issue ticket for any observed bug or compatibility issue with the project.
  • File feature request for missing features.
  • Take open bugs or feature request and work on it and send a Pull Request.
  • Write unit tests for existing codebase (which is not covered by tests today). Help wanted on this - read more.

Support 💖

This project would not be possible without all of our fantastic contributors and sponsors. If you'd like to support the maintenance and upkeep of this project you can donate via GitHub Sponsors.

Sponsor the project for priortising feature requests / bugs relevant to you. (Depends on scope of ask and bandwidth of the contributors).

webauthor@ ben-gy bujjivadu

Help incentivise feature development, bug fixing by supporting the sponsorhip goals of this project. See list of sponsered feature requests here.

Also, huge thanks to following organizations for non monitery sponsorships

Credits

The decoder used for the QR code reading is from Zxing-js https://github.com/zxing-js/library